Archive for December, 2015

Symantec, the space hog

December 9, 2015

If you’ve found this page then you know how much of a pain Symantec Endpoint Protection can be when it comes to eating up space. Server today ran out of space – down to 500mb on the main drive. After clean up it’s back to 71GB… yes you read that right.

So how to clean up Symantec Endpoint Protection’s mess? Simple;

Stop the Symantec Services.
Go to C:\Program Files\Symantec\Symantec Protection Center\db and delete (or if you have space then copy this off somewhere or zip it) the sem5.log.
Start the Symantec Services.

That bad boy just continues to eat up space without regard for the environment. Now I’m assuming that there is some sort of limit you can impose on the log file but honestly I haven’t had time (who does) and so I periodically remote in and run the above steps.

Fixed problem.

VPN’s & DNS riddles

December 9, 2015

So you setup a VPN and it works. Well it kinda works. You connect and can ping but you can’t use DNS right? You can’t ping “remoteserver” but you can ping 192.168.1.10.

Simple… just add the VPN’s DNS sever right? Sure that should work… but it doesn’t does it?

Grrr annoyed you add an entry to the hosts file! WTH? Who uses that anymore anyway? But it STILL doesn’t work!

Ahh forget it. They can just remap their drives using an IP address.

-OR-

Here’s how to fix it! Yay. I finally got tired of this issue and spent some time getting it to work. So before I ramble on any longer here’s the fix;

  • Open properties on your VPN connection.
  • Go to the Networking Tab
  • Bring up TCPIP (v4 – for now)
  • Advanced
  • DNS
  • If you haven’t already, then add your VPN’s LAN DNS server in the first field under “DNS server addresses”
  • In the second field you want to append these DNS suffixes
  • Add in here the FQDN or something like mylocaldomain.local (or what ever your local AD domain is)

Worked for me.

DNS changes in DHCP

December 3, 2015

This is something that might help for future reference. Something I very rarely have to do but would helpful for other people and a good reference.

Specifically changing where your DHCP client points DNS requests to.

  1. Open DHCP Manager
  2. Drill down to the scope
  3. Open Scope Options
  4. double tap DNS Servers
  5. Add your new shiny server and move it to the top of the list
  6. Click OK and you’re done